ep91/82 fuel feed line group buy
3 posters
Page 1 of 1
ep91/82 fuel feed line group buy
we are designing up a complete fuel delivery kit for the 4e/5e, this is the first stage
kit replaces the fuel delivery hose with banjo bolts with this high flow bend kit, everything you need to bolt straight onto the fuel filter and then bolt straight onto the oem fuel rail comes complete with new washers
benifits of the kit is mainly cosmetic but a good choice to replace a old 15 year+ rubber hose thats been there since the car was built, the straight through fitting put a little less on the fuel pump over the banjo bolt fittings
here is a pic of the kit
the kit can be supplied with a ss braided hose or black nylon braided hose, all hoses are made for fuel and have high tolerances
would need 5 people to get the gb going price will be 49 euro delivered, if we can get 10 names we can drop that price down to 45 euro delivered, remember also they are sent by reg post which is dearer
any interest let me know
kit replaces the fuel delivery hose with banjo bolts with this high flow bend kit, everything you need to bolt straight onto the fuel filter and then bolt straight onto the oem fuel rail comes complete with new washers
benifits of the kit is mainly cosmetic but a good choice to replace a old 15 year+ rubber hose thats been there since the car was built, the straight through fitting put a little less on the fuel pump over the banjo bolt fittings
here is a pic of the kit
the kit can be supplied with a ss braided hose or black nylon braided hose, all hoses are made for fuel and have high tolerances
would need 5 people to get the gb going price will be 49 euro delivered, if we can get 10 names we can drop that price down to 45 euro delivered, remember also they are sent by reg post which is dearer
any interest let me know
pig666eon- Big Bird
- Posts : 514
Reputation : 16
Join date : 2012-12-21
Re: ep91/82 fuel feed line group buy
here lads this is what there like in reall life great bit of kit and even fitted whit my acis intake
here a quik fitting guide for the boys who dont know ( go buy some plummers tape )
use spanner 17 and 19 to open the hose on the filter 19 bottom 17 top spanner
make sure to open petrol cap or feul pressure spray will go evrywhere
again using ring spanner 17 open the bolt on the fuel rail
now the fun begins ( 5e colins tip of the day ) get electrical tape and tape up the new bleu bolts and the fittings on the hose so not to scratch the pritty hose
be nice and gentle and use a good spanner not to break it ,u do this at both ends
i almost forgotten to tell u lads u have to pull back the oem hose guide braket ontop of the filter that holds it in place dont worry it just flattens easy as
and after all ur hard work this is the result
and thanks for the help of colin jr for holding the feul pipe ha ha
before closing the bonnet and driving of start ur engine and check for feul leaks
5e colin- Posts : 90
Reputation : 1
Join date : 2012-12-31
Location : THE BOOST LANE
Kenny cynos- The Wexican
- Posts : 430
Reputation : 26
Join date : 2012-12-21
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|