Glanza V not boosting.

Car stopped boosting on way to work earlier, was ok one minute then not the next.

Isn't fuel cut
Blew a boost pipe off?

maybe turbo siezed up not spinning or like u sait a boost pipe of or rip in it

if the pipe is of u can hear the turbo spin

Do you have a boost gauge
You probably have a boost leak some where check all vacum line and intercooler pipe

Yeah i've got a gauge.

I'll have a check after work.

Cheers guys

Yeah , boost gauge is reading 0 bar when I should be at 0.7.

Turbo doesnt even seem to be tryin to spool?

you have a boost leak
mine was like that too gauge read 0
check all vacum line for cracks orholes
check you intercooler pipe

Thinking my actuator, wastegate arm's came loose from the circlip?

possible that too is it standard actuator or a upgraded one

Standard

if its not working now and was fine before then it has to be a leak, if the clip on the act was the issue it would be over boosting

Sorted now guys

so tel us what was the problem

Wastegate arm had came loose from the elbow due to a snapped circlip.

Fixed now